ZP6823-WDM is an all-in-one EOC Master with EOC master module, ONU module and OR module.
We can use one ZP6823-WDM to instead of three type products, HFC optical node, EPON ONU and EOC mater. It can reduce the number of active node in the system, decreasing failure rate and saving a space. It is the best choice of CATV, Internet and VOD for the operator.
The EOC Master Module in the ZP6823-WDM is based the Qualcomm AR7410 chipset solution,with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.
The OR module in theZP6823-WDM can provide an HFC optical input and one RF output. The CATV signal will convert from optical to RF signal here. The OR module is a high quality optical receiver product. It received the optical signal from the TX of HFC network, and the signal processed by the PIN, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 108dBuv.
The ONU module in the ZP6823-WDM designed with one EPON port, two standard 10/100/1000 Base-TX Ethernet ports. It provides the key functionality of 802.3ah EPON ONU. By using the EPON technology, the ONU module provides a high-speed data channel through a single optical fiber with a rate of 1.25 Gbit/s on bi-direction. In addition, it offers the QOS, flexible bandwidth allocated to provide quality high-speed data service, voice service, and video service.
FUNCTION FEATURES
- High integration with two EOC Master modules, one ONU module and one OR module
- Aluminum alloy die casting shaping, good heat dissipation
- Outdoor waterproof designed, 60V/220V power supply optional
- 5-65Mhz frequency for EOC signals., no influence on CATV Service
- Support data encryption
- Support broadcast storm limitation
- Support data packet statistics
- Support auto-update and auto-configuration
- Support the optical power monitor
- Flexible bandwidth allocation function
- Support various QOS service level
- EMS network management based on SNMP
- Provide a rich fault alarm function, easy to fault diagnosis
- Support software online upgrade
- OR support AGC
- CATV RF output up to 108dBuv
- ONU module compliant with IEEE802.3ah and CTC2.1standards.
- ONU module provides tow auto-negotiation GE ports
- ONUmodule support interconnection with the third-party OLT
- Support the EMS network based on SNMP