ONU+OR+4EOC All In One (completed) – ZP6833-WDM
ZP6833-WDM is an all-in-one EOC Master with EOC master module, ONU module and OR.
Product Specification
| Item | Parameters | Specification |
| Main Functional Module Configuration | ONU | 1 x GPON or 1* EPON ONU |
| EOC Master | 2*EOC Master or 4*EOC Master | |
| CATV | 1 x CATV Optical Receiver with WDM or not | |
| External Interface | Fiber Port | 5/8” type, 2 port, for Fiber Optic Pigtail input |
| COM Port | F-Type female, 4 output port for mixed EOC and CATV signal | |
| Power Input Port | F-Type female, line power(40-90VAC) input version | |
| Power cord with China plug, | ||
| Mains Powered (90-264VAC) version | ||
| Uplink | Broadcast CATV | With WDM version, 1*CATV/PON optical input, SC/APC, |
| (optional with WDM or not) | 1*PON output, SC/PC, connected with ONU input | |
| Without WDM Version, 1*CATV optical, SC/APC | ||
| Ethernet Data | 1*EPON PX20+, SC/PC (EPON Version) | |
| (EPON or GPON optional) | 1*GPON Class B+, SC/PC (GPON Version) | |
Specification of ONU Parts |
||
| EPON | Standard compliance | IEEE 802.3ah |
| Optical Interface | 1 x EPON PX20+, SC/PC | |
| Transmission Rate | Upstream: 1.25Gbps, Downstream: 1.25Gbps | |
| Transmission Distance | 20Km@1:32 | |
| Optical Fiber Type | 9/125um, Single Mode, Single Fiber | |
| Wavelength | Upstream 1310nm, Downstream 1490nm | |
| Optical Power Tx | 0dBm to 4dBm (PX20+) | |
| Receiving Sensitivity | -27 dBm | |
| GPON | Standard compliance | ITU-T G.984.X |
| Optical Interface | 1 x GPON CLASS B+, SC/PC | |
| Transmission Rate | Upstream: 1.244Gbps, Downstream: 2.488Gbps | |
| Transmission Distance | 20Km@1:64 | |
| Optical Fiber Type | 9/125um, Single Mode, Single Fiber | |
| Wavelength | Upstream 1310nm, Downstream 1490nm | |
| Optical Power Tx | +0.5dBm to +5dBm(Class B+), | |
| +0.5dBm to +5dBm(Class C+) | ||
| Receiving Sensitivity | -27 dBm(Class B+), -30 dBm(Class C+) | |
| Indicator | Indicator Description | PWR: Power up or down |
| PON：ONU registered | ||
| LOS: Optical Link Status | ||
| ETH: Link Status of ONU Ethernet port to EOC master | ||
| Network Management | Management Mode | Support IEEE802.3 QAM (EPON) |
| Support ITU-T G.984.X OMCI (GPON) | ||
| Support Remote management through SNMP | ||
| Suppoort Remote Management via Telnet | ||
| Function | Status monitor, Configuration management, Alarm management, Log management | |
Specification of OR |
||
| Optical Specifications | Wavelength | Without WDM version: 1550 nm |
| With WDM version: | ||
| 1540~1560nm (CATV), 1260-1500nm(PON) | ||
| Optical Power Input Range | -8 ~ +2 dBm | |
| Recommend optical Power Input Range | -6 ~ 0dBm | |
| Optical Input Return Loss | ≥45 dB | |
| RF Specifications | Bandwidth | 45~860 MHz |
| Flatness | ≤±1.5 dB | |
| Nominal RF Output Level | 108 dBuV (4*RF Output ) | |
| Impedance | 75 Ohm | |
| Return Loss | ≥14 dB | |
| CNR | ≥51 dB | |
| CSO | ≥60 dBc | |
| CTB | ≥60 dBc | |
| Note: CNR, CSO, CTB parameter testing environment is in1550nm directly modulation transmitter, optical input -1dBm，OMI=3.2%, 59CH PAL-D signal load. | ||
| Optical and temperature AGC | Stability of RF Level under optical AGC | ≤±1 dB |
| AGC Scope | -6 ~ 0dBm | |
| LED Indicator | Indicator Description | OPT-L: Optical power is lower |
| OPT-M: Optical power is nominal | ||
| RF1: Status of Output 1 of optical receiver module | ||
| RF2: Status of Output 2 of optical receiver module | ||
Specification of EOC Master |
||
| Interface | Management Port | 1 * 10/100/1000M auto-negotiation, RJ45 |
| LED Indicator | LED Indicator | PWR: Power Supply Status |
| LINK: CABLE Link Status indicator | ||
| ETH1: Ethernet Ports Status connected as uplink | ||
| ETH2: Ethernet Ports Status connected as downlink | ||
| Performance Parameters | RF Parameters | Frequency Band :7.5-65MHz |
| RF Output Level: | ||
| 110±5dBuv @4 RF output port (4 EOC master version) | ||
| 105±5dBuv @4 RF output port (2 EOC master version) | ||
| Receive sensitivity: 45dBuv | ||
| Transmission | PHY Layer: 600Mbps | |
| Throughput on MAC Layer: 320Mbps | ||
| Modulation Mode | OFDM2690 carriers, 4096/1024/256/64/16/8 QAM, QPSK, BPSK, ROBO | |
| Working Mode | TDMA/CSMA | |
| Encryption Mode | AES-128 | |
| Standard | EOC Standard | IEEE P1901(Draft) , HomePlug AV |
| Ethernet Standard | IEEE 802.3, IEEE 802.3x, IEEE 802.3u | |
| IEEE802.1P, IEEE802.1Q | ||
| Software | Network Management | WEB, CLI, SNMP |
| Software Features | VLAN, QOS, Bandwidth Control, Broadcast storm limitation | |
Physical Features |
||
| Physical Features | Power supply | Line Power(90-264VAC) |
| Cable power(60VAC) optional | ||
| Power Consumption | Consumption：<45 W (4 EOC master Version) Consumption：<36 W (2 EOC master Version) | |
| Size | Dimension：290×220×120mm | |
| Net weight | 4.2kg (4 EOC master Version) | |
| 3.7kg (2 EOC master Version) | ||
| Environment Attribute | Working Temperature：-20 ~ 65℃ | |
| Storage Temperature：-40 ~ 85℃ | ||
| Working humidity：10% ~ 90%non-condensing | ||
| Storage humidity：10% ~ 90% non-condensing | ||
Product Overview
Network Application
Ordering Information
Related Products
With different models, you can find right devices.
Get In Touch
If you have questions about our products, fill in your contact information and our product specialist will contact you shortly.
